NOTE: we based ourselves on different kinds of sources, which often were handwritten by sales persons. Not all information could be traced yet.
| id | Producer | model_name | model_short_name | production_years | successor of | replaced_by | production_numbers | selling_price | leasing_price | size | weight | ----- | mixer | magazines_nr | magazines_number_mixed | magazine_channels | magazines_details | distributors_nr | distributors_details | moulds_nr | moulds_details | ejector_details | matrices_sizes | matrices_details | specialities | comparable_with |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | Intertype | Model A | A | ----- | No | 1 | 90 | 1 | ||||||||||||||||||
| 2 | Intertype | Model B | B | ----- | No | 2 | 90 | 1 | Model B is a machine identical to model A, but had two magazines. | |||||||||||||||||
| 3 | Intertype | Model C | C3 | ----- | No | 3 | 90 | 1 | Model C is a machine identical to model A, but had three magazines. | |||||||||||||||||
| 4 | Intertype | Four Deck Model C (Streamlined) | C4 | ----- | No | 4 | 90 | 1 | An extension of model C. The specification 'streamlined' points out that all the moving parts are shielded, and that additional technical improvements were made. | |||||||||||||||||
| 5 | Intertype | Model D | D | ----- | No | 3 | 90 | 1 | Model D is a machine identical to model C, but is constructed in such a way that longer lines could be cast (The Dutch Literature mentions 'longer than 28 augustijn'). | |||||||||||||||||
| 6 | Intertype | Model E (mixer) | E | Model F | ----- | Yes | 2 | 2 | 90 | 2 | ||||||||||||||||
| 7 | Intertype | Model F (mixer) | F | Model E | ----- | Yes | 2 | 2 | 90 | 2 | It is lower in height than model E. | |||||||||||||||
| 8 | Intertype | Four Deck Model F (Streamlined) | F4 | ----- | Yes | 4 | 2 | 90 | 2 | The specification 'streamlined' points out that all the moving parts are shielded, and that additional technical improvements were made. | American Linotype model 29 | |||||||||||||||
| 9 | Intertype | Model G | G | ----- | Yes | 2 | 2 | 90 & 72 | 2 | Model G is identical to model F, except that one magazine has 72 channels suited for larger type sizes. | ||||||||||||||||
| 10 | Intertype | Four Deck Model G (Streamlined) | G4 | ----- | Yes | 4 | 2 | 90 & 72 | 2 | This machine is an extension of model G which has four magazines with 90 or 72 channels. A lamp shines when there are matrices in the distribution, warning the operator that the magazines cannot be changed yet. The specification 'streamlined' points out that all the moving parts are shielded, and that additional technical improvements were made. | American Linotype model 29 | |||||||||||||||
| 11 | Intertype | Model H | H | ----- | No | 3 | 72 | 1 | This model is intended for the advertising industry due to its 72 channel magazines. | The Intertype sales person Spencer (n.d.) compares this machine to the Linotype model 28. | ||||||||||||||||
| 12 | Intertype | Four Deck Model H (Streamlined) | H4 | ----- | No | 4 | 72 | 1 | This machine is an extension of model H and has four magazines with 72 channels. It need to be checked if this model existed, it could have been a wrong notition. | |||||||||||||||||
| 13 | Intertype | Model X | X | ----- | No | 2 | 1 | The model X was a factory rebuild Linotype, 'thoroughly reconstructed and modernized with Intertype Parts and Improvements', carrying two Intertype magazine. Changing the magazine was done simply with a lever. Magazines are interchangeable with the magazines used on an Intertype model A or B. | ||||||||||||||||||
| 14 | Intertype | Model Z | Z | ----- | No | 1 | 1 | The model Z was a factory rebuild Linotype, 'thoroughly reconstructed and modernized with Intertype Parts and Improvements', carrying one standard Intertype magazine. | ||||||||||||||||||
| 15 | Intertype | Monarch | 196?-… | ----- | ? | Where the Electron often was poorly regarded by operators, the Monarch was often much more highly regarded by operators. | Linotype Elektron | |||||||||||||||||||
| 16 | Intertype | Fotosetter | ----- | ? | 4 | |||||||||||||||||||||
| 17 | Italtype | Model Alfa | ----- | No | 1 | |||||||||||||||||||||
| 18 | Italtype | Model Gamma | ----- | No | 3 | |||||||||||||||||||||
| 19 | Italtype | Delta | ----- | No | 4 | |||||||||||||||||||||
| 20 | Linograph | Model 1 | 1911-1939 | ----- | No | 1 | short Linograph mats | |||||||||||||||||||
| 21 | Linograph | Model 3 | 1921-1939 | ----- | No | 3 | short Linograph mats | |||||||||||||||||||
| 22 | Linograph | Model 12 | 1923-1924 | ----- | No | 12 | standard mats | |||||||||||||||||||
| 23 | Linograph | Model 5 | 1937 | ----- | No | 5 | short Linograph mats | |||||||||||||||||||
| 24 | Linograph | Model 50 | 1938-1940 | ----- | No | 5 | standard mats | |||||||||||||||||||
| 25 | Linograph | Model 52 | 1939 | ----- | No | 2 | 2 magazine version of model 50 (low cost alternative for newspaper work) | |||||||||||||||||||
| 26 | Linotype (DE) | Model 1 | 1 | ----- | No | 1 | 1 | It was a derivative of the American Model 1. Since 1901, the name 'Simplex' was applied, at least informally. | ||||||||||||||||||
| 27 | Linotype (DE) | Model 2 Simplex | 2 | ----- | No | 1 | 1 | |||||||||||||||||||
| 28 | Linotype (DE) | Model 4 Simplex-Ideal | 4 | ----- | No | 1 | It has shorter magazines, which could only contain up to 15 matrices per channel. | 1 | ||||||||||||||||||
| 29 | Linotype (DE) | Model 4A | 4A | ----- | No | 2 | It has shorter magazines, which could only contain up to 15 matrices per channel. | 1 | Model 4a is identical to model 4, but has two magazines. | |||||||||||||||||
| 30 | Linotype (DE) | Model 4B (Zwei-in-Einer-Linotype) | 4b | ----- | No | 3 | The Zwei-in-Einer-Linotype, model 4b is identical to model 4a, but is equipped with three main magazines, which are also extra large. Those magazines contain 124 channels. The last 34 channels are spaced more widely, to maintain thicker matrices with larger type sizes. For this reason, the machine could be used for both regular work and the advertising industry. | |||||||||||||||||||
| 31 | Linotype (DE) | Model 4B/G | 4b/g | ----- | No | Extra wide magazines | ||||||||||||||||||||
| 32 | Linotype (DE) | Model 5 | 5 | ----- | ? | 2 | 2 | |||||||||||||||||||
| 33 | Linotype (DE) | Model 5CS (Mixer) | 5c,S | ----- | Yes | 2 | 2 | |||||||||||||||||||
| 34 | Linotype (DE) | Model 6 | 6 | ----- | No | 2 | ||||||||||||||||||||
| 35 | Linotype (DE) | Model 8 | 8 | It could be purchased as a one-magazine machine and extended later on. | ----- | No | 3 | 1 | ||||||||||||||||||
| 36 | Linotype (DE) | Model 10 (Mixer) | 10 | ----- | Yes | 4 | 4 | 4 | ||||||||||||||||||
| 37 | Linotype (DE) | Model 10A (Mixer) | 10A | ----- | Yes | 4 | 4 | 4 | 4 | |||||||||||||||||
| 38 | Linotype (DE) | Model 11 (Mixer) | 11 | ----- | Yes | 4 | 4 | 90 and 68 | Model 11 is identical to model 10, with the exception of the lower two magazines. Those only had 68 channels for larger type sizes. | 4 | ||||||||||||||||
| 39 | Linotype (DE) | Model 12 | 12 | ----- | ? | Model 12 is identical to model 5, but is equipped with two side magazines. | ||||||||||||||||||||
| 40 | Linotype (DE) | Model 13 | 13 | ----- | ? | It has shorter magazines, which could only contain up to 15 matrices per channel. | The magazines hold from Nonpareil to middle size characters, accents, Sorts, etc. (Spencer, n.d.) | Model 13 is identical to model 4a, but is equipped with larger main magazines. Those magazines contain 124 channels to limit the use of the hand matrices. The keyboard is also extended with 34 additional keys to 124 key buttons. | ||||||||||||||||||
| 41 | Linotype (DE) | Linotype-Universell | ----- | No | 0 | 0 | 0 | This Linotype-Universell has little in common with the other Linotypes. Matrices are inserted by hand. | The machine has the same purpose as the All-Purpose-Linotype from the American models. | |||||||||||||||||
| 42 | Linotype (DE) | Model 16 | 16 | ----- | ? | 4 | Model 16 is an extended model 8, it has four magazines. Those magazines can maintain matrices up to a type size of 60 point. | |||||||||||||||||||
| 43 | Linotype (DE) | Model 18 | 18 | ----- | ? | |||||||||||||||||||||
| 44 | Linotype (DE) | Model 20 | 20 | ----- | ? | |||||||||||||||||||||
| 45 | Linotype (DE) | Model 22S | 22S | ----- | ? | |||||||||||||||||||||
| 46 | Linotype (DE) | Model 24Q | 24Q | ----- | ? | |||||||||||||||||||||
| 47 | Linotype (DE) | Model 28Q | 28Q | ----- | ? | |||||||||||||||||||||
| 48 | Linotype (DE) | Elektron | ----- | ? | ||||||||||||||||||||||
| 49 | Linotype (DE) | Model gamma | gamma | ----- | ? | |||||||||||||||||||||
| 50 | Linotype (UK) | Square-Base Linotype | Square-Base | 1892-… | / | ----- | No | In 1892, the first 20 UK made square base Linotypes are installed in the Newcastle Daily Chronicle | ||||||||||||||||||
| 51 | Linotype (UK) | Model 1 | 1 | 1895-1906 | Model 2 | ----- | No | 1 | 1 | Not called Model 1 until the production of Model 2 | ||||||||||||||||
| 52 | Linotype (UK) | Model 2 | 2 | 1906-… | Model 1 | ----- | No | First front magazine change model. Escapement pawls independent of magazine – only model to have this feature until introduction of the Elektron in 1962. | ||||||||||||||||||
| 53 | Linotype (UK) | Model 3 (Mixer) | 3 | 1907-… | ----- | Yes | 2 | 2 | ||||||||||||||||||
| 54 | Linotype (UK) | Model 4 | 4 | 1908-… | ----- | No | 3 | 1 | ||||||||||||||||||
| 55 | Linotype (UK) | Model 65 (Mixer) | 65 | 1913-… | ----- | Yes | 4 | 2 | Matrices could be mixed from magazines 1 and 2, or 3 and 4. | |||||||||||||||||
| 56 | Linotype (UK) | Model 6 (Mixer) | 6 | 1916-… | Model 50 | ----- | No | 4 | 2 | Matrices could be mixed from magazines 1 and 2, 2 and 3, or 3 and 4. | American Linotype model 29 | |||||||||||||||
| 57 | Linotype (UK) | Model 4SM | 4SM | 1923-… | ----- | No | 3 | One keyboard, side magazines controlled from main keyboard. 3 main magazines, 2 side magazines. | ||||||||||||||||||
| 58 | Linotype (UK) | Model 6SM | 6SM | 1929-… | ----- | No | 4 | Two keyboards, first 8-magazine machine (4+4). | ||||||||||||||||||
| 59 | Linotype (UK) | Introduction of the three-way quadder | 1933-… | ----- | No | |||||||||||||||||||||
| 60 | Linotype (UK) | Model 48 (also available as SM model) | 48 | 1935-… | It could be purchased as a one-magazine machine and extended later on. | ----- | No | 3 | First models had up to 3 main and 3 side magazines (SM model). Later models up to 4 + 4 magazines. | 1 | The last model 48 had serial number 16515 (from 1958) | |||||||||||||||
| 61 | Linotype (UK) | Model 50 (Mixer, also available as SM model) | 50 | 1936-1959 | Model 6 | Model 79 in 1959 | ----- | Yes | 4 | 90 and 72 (unclear if both at the same time) | Main magazines wider than normal. A further development was the “Super range” which can accommodate large display matrices in the extra wide main magazines; they have 72 channels, instead of 90. | 2 | ||||||||||||||
| 62 | Linotype (UK) | Model 53 | 53 | 1953-1959 | Model 73 in 1959 | ----- | No | 1 | 1 | 2 | ||||||||||||||||
| 63 | Linotype (UK) | Model 54 | 54 | 1954-1959 | Model 79 in 1959 | ----- | ? | High speed machine for TTS operation | ||||||||||||||||||
| 64 | Linotype (UK) | Model 70 (also available as SM model) | 70 | 1959-… | Model 50 | ----- | ? | |||||||||||||||||||
| 65 | Linotype (UK) | Model 72 (also available as SM model) | 72 | 1959-… | / | ----- | ? | Model “Super range” | ||||||||||||||||||
| 66 | Linotype (UK) | Model 73 | 73 | 1959-… | Model 53 | ----- | ? | |||||||||||||||||||
| 67 | Linotype (UK) | Model 78 (also available as SM model) | 78 | 1959-… | Model 48 | ----- | ? | The first model 18 had serial number 16516 (from 1958) | ||||||||||||||||||
| 68 | Linotype (UK) | Model 79 | 79 | 1959-… | Model 54 | ----- | ? | |||||||||||||||||||
| 69 | Linotype (UK) | Elektron | 1962-… | / | / | ----- | ? | |||||||||||||||||||
| 70 | Linotype (US) | The Blower-Linotype | Blower | / | Model 1 in 1890 | ----- | No | The blower-Linotype was the first commercial typecaster, which would later evolve into the Linotype as commonly known. It did use separate matrices and air was used to blow these into the assembling elevator. The first four machines were used in the printing house of the New-York Tribune in July 1886. Eventually, more than 200 of those machines were built, ten were sent to England. | ||||||||||||||||||
| 71 | Linotype (US) | Square-Base Linotype | Square-Base Machine | 1890-… (and at least in development since 1889) | The Blower-Linotype | Model 1 in 1892 | ----- | No | 1 | 1 | This model is in later literature often wrongly referred to as the 'simplex', but the simplex was a German machine (MacMillan, 2013). | |||||||||||||||
| 72 | Linotype (US) | Model 1 | 1 | 1892-… (This model was shown in prototype form in Feb. 1890 at the Judge Building in NY (Mergenthaler, 1989, p.56-57.) | The Square-Base Machine | Model 3 in 1902 | Around 6000 were sold worldwide. | $3150 (Spencer, n.d.) | $550 annually for six years (Spencer, n.d.) | ----- | No | 1 | Magazines were not interchangeable with other models. Magazines had an old style channel entrance; each channel entrance was attached to the magazine. Removeable from the rear | 1 | Single blade, to be replaced for every change in body and measure. | Limited to faces from 5 point to 11 point (*see note below the page). It has a very narrow magazine, with channels very close to each other, limiting the matrices to faces up to 11 points only. | Model 1 is the first successful Linotype. Replacing magazines was a tendious task which took around an hour and required two men. The Model 1 was inaccessible, meaning that it was difficult to replace cams, keyrods, verges, etc. Any breakage caused an expensive loss of time. | |||||||||
| 73 | Linotype (US) | Model 2 | 2 | 1903-… (and at least in development since 1889) | Model 4 in 1906 | $3600 (Spencer, n.d.) | ----- | No | 2 | Removeable from the rear. Practycally instaneously changed by a lever at the operator's right. One set of keyrods, the lower magazine had verges on its top (controled by the lever). The lower magazine is several inches shorter, only holding 16 matrices. | 2 | Mixer with 2 distributors, 2 rails and 2 set of screws for automatic separation. Matrices for the lower magazine had a large beveled notch cut in the bottom. Matrices with the notch cut can run in an upper magazine or in a single magazine machine by use of a special attachment. Matrices without the beveled notch can not run in a lower magazine. | Single blade, to be replaced for every change in body and measure. | It was not very successful, mainly of its complicated double magazine mechanism. According to Spencer (n.d.), most lower magazines in this model were out of use, or only used rarely for headlines but not for straight composition. According to Spencer, Mergenthaler salesman often claimed that the lower magazine was almost as fast as the upper one, but "the assembling of lower magazine matrices was necessarily slow; because they had to first travel along a horizontal matrix delivery belt and then slide, one by one, down a chute leading to the assembling elevator. Besides, the matrices in the course of their long journey to the assembling point were apt to clog, either on the horizontal matrix delivery belt or in the chute. In either case it was difficult to get them out." Also, because the lower magazine was shorter, it only contained 16 matrices, forcing the operator to wait frequently till new matrices were distributed in it. According to Spencer, "faces smaller than 8 point were particularly troublesome in a lower magazine because of their lightness. The upper magazine had the old style channel entrance and was interchangeable with the Model 3 magazines of that kind. The lower magazine of Model 2 was not interchangeable with that of any other model. There were no special differences between the casting mechanism of the single and double magazine machines." | ||||||||||||
| 74 | Linotype (US) | Model 3 (the pica machine) | 3 | February 1902-… | Model 1 | Model 5 in 1906 | According to Spencer, relatively few Model 3's were sold, because it was soon superseded by Model 5. | $3150 (Spencer, n.d.) | ----- | No | 1 | Removeable from the rear. Older Model 3's have the old style channel entrance; where each channel entrance was attached to the magazine. Those are interchangeable with the Model 2. Later machines had the new style entrance, attached to the machine; which were not interchangeable with any other machine. | 1 | Single blade, to be replaced for every change in body and measure. | It is the first machine to support 12 point and larger faces, hence it received the name 'the pica machine'. Linotype.wiki contains a text about the names for the type sizes. | According to Spencer, "Comparatively few Model 3's have been sold, because the machine was soon superseded by the Model 5." "Quite a number have been rebuilt into Model 5's both in the Linotype factory and by outsiders. The latter practice was discouraged until the coming of the Intertype, and they still prefer to accept the old machine in part payment toward a new one of the later model." | ||||||||||
| 76 | Linotype (US) | The Linotype Junior | Linotype Junior | June 1902-… for the one-letter, low base July 1907-… for the one-letter, high base January 1908-… for the two-letter According to the Printing museum (n.d.), they were produced till the end of WWI. According to Spencer (n.d.), none have been sold since Models 10 and 15 were introduced. | The Linotype Junior was a half-priced model of the regular Linotype, aimed at small newspaper offices. | ----- | No | A variety of faces was produced, in 6, 8 and 10 point sizes. Changing faces was tedious and not frequently attempted (Spencer, n.d.). | Spencer stated: Except in general principles, this machine was wholly unlike any other Linotype. It was designed for small newspaper offices, first as a one-letter machine and later two-letter. Practically none have been sold for the past few years, particularly since the advent of Models 10 and 15, The machine was very troublesome and very few were running today. Most of them have been taken back by the Linotype Company, in part payment for other models. The Junior was a slow machine, setting from two to four thousand ems per hour. It cannot produce slugs wider than 13 ems, and seldom was used for more than one size and body. Quite a variety of faces were furnished, in 6, 8 and 10 point sizes, but changes from one to another were tedious and not frequently attempted. | |||||||||||||||||
| 77 | Linotype (US) | Model 4 (Mixer) | 4 | November 1906-… | Model 2. There were few differences, except that it was the first 'quick change' double magazine Linotype. | ----- | Yes | 2 | 2 | Upper magazine removable from the front Lower magazine removeable from the rear. Practycally instaneously changed by a lever at the operator's right. One set of keyrods, the lower magazine had verges on its top (controled by the lever). The lower magazine is several inches shorter, only holding 16 matrices. On the Model 4 it was necessary to lock the matrices in, this being accomplished by thrusting a small locking bar through the bottom of the magazine. This does not require much time unless the locking bar was stopped by some matrix which had stuck in the bottom of the magazine. After getting the locking bar in place the operator must raise the bottom of the magazine a few inches, by means of two levers at the sides of the machine, when it was possible to slide the magazine down and off. The lower magazine was removed from the rear, and it was possible to change it while the upper magazine was in use. This feature was much talked about by the Linotype people. The lower magazine distributor was somewhat more accessible than that of Model 2. The upper magazine was interchangeable with those of Models 5. 6, 7 (upper), 8, 11, 14, 18 and 19; the lower magazine was interchangeable with the lower magazine of Model 7. | Slugs up to 30 ems. A water cooled mold disk as standard equipment, but added only after the beginning of Intertype competition. | Single blade, to be replaced for every change in body and measure. | Two-letter machine, which means that it was intended for two-letter matrices (The Mergenthaler Linotype Company, 1906, 1908 reprint, p. 56). Matrices for the lower magazine had a large beveled notch cut in the bottom. Matrices with the notch cut can run in an upper magazine or in a single magazine machine by use of a special attachment. Matrices withouth the beveled notch can not run in a lower magazine. The Mergenthaler Linotype Company, 1906, 1098 reprint, p. 56 recommends to select commonly used faces for the upper magazine and head-letters or other faces which are of secondary importance for the lower magazine | An automatic sorts stacker is standard equipment. | ||||||||||||
| 78 | Linotype (US) | Model 5 | 5 | February 1906-… | Model 3. There were few differences, except that it was the first 'quick change' single magazine Linotype. | ----- | No | 1 | Removable from the front, similar as the upper magazine of the Model 4. | 1 | After the Intertype was introduced, this model became equiped with an 'automatic sorts stacker' (Spencer, n.d.). | 2 | Standard mold adjustable in length from 5 to 30 ems pica. A water cooled mold disk became standard equipment, having been added since the Intertype was introduced. | Single blade, to be replaced for every change in body and measure. | One-letter machine, which means that it was intended for single-letter matrices. It could not handle italic or bold faces in connection with the body faces (Regulars), but could carry a font of either separately (The Mergenthaler Linotype Company, 1906, 1908 reprint, p. 56). | Advertised for: Newspaper or Plain Composition (The Mergenthaler Linotype Company, 1906, 1098 reprint, p. 56). Yiddisch-English Machine available (The Mergenthaler Linotype Company, 1906, 1098 reprint, p. 56). A note from Spencer on used and rebuilt Model 5's: "Attention was called to the fact that some tired or rebuilt Model 5's carry a factory number below that of the first Model 5 which was shipped from the Linotype Factory. This was conclusive evidence that the machine originally was either a Model 1 or Model 3. The first Model 5 was No. 9851 and was shipped in February 1906. Keep this in mind, and, when in competition with a used or rebuilt Model 5, caution the prospect in a pleasant way to see that the factory number of the Model 5 offered was not below No. 9851." | Spencer (n.d.) compares this to the Intertype with "A" Equipment. It is unclear if he means a Model A (quite uncertain), or a Model X rebuild Linotype with certain equipment. | |||||||||
| 79 | Linotype (US) | Model 6 | 6 | January 1908-… | ----- | No | 1 | Removeable from the front, similar as the upper magazine of the Model 5. | 1 | 2 | Standard mold adjustable in length up to 36 ems pica (The Mergenthaler Linotype Company, 1906, 1908 reprint, p. 54). De Jong (1947, Dutch literature) mentions 'a length of 34 augustijn'. Wide measure molds are adjustable from 30 till 36 ems inclusive (The Mergenthaler Linotype Company, 1906, 1908 reprint, p. 54). For shorter measures, regular molds should be used. | Single blade, to be replaced for every change in body and measure. | One-letter machine, which means that it was intended for single-letter matrices. It could not handle italic or bold faces in connection with the body faces (Regulars), but could carry a font of either separately (The Mergenthaler Linotype Company, 1906, 1908 reprint, p. 56). | Model 6 is identical to model 5, but is constructed in such a way that lines up to 36 ems could be cast. This is the first model that can handle this lenght for a line of text. Advertised for: Newspaper or Plain Composition (The Mergenthaler Linotype Company, 1906, 1098 reprint, p. 56). | ||||||||||||
| 80 | Linotype (US) | Model 7 | 7 | October 1907-… | ----- | No | 2 | Upper magazine removable from the front. Lower magazine removeable from the rear. Practycally instaneously changed by a lever at the operator's right. One set of keyrods, the lower magazine had verges on its top (controled by the lever). The lower magazine is several inches shorter, only holding 16 matrices. | 2 | Mixer with 2 distributors, 2 rails and 2 set of screws for automatic separation. | 2 | Standard mold adjustable in length up to 36 ems pica (The Mergenthaler Linotype Company, 1906, 1098 reprint, p. 56). De Jong (1947, Dutch literature) mentions 'a length of 34 augustijn'. Wide measure molds are adjustable from 30 till 36 ems inclusive (The Mergenthaler Linotype Company, 1906, 1098 reprint, p. 54). For shorter measures, regular molds should be used. | Single blade, to be replaced for every change in body and measure. | Two-letter machine, which means that it was intended for two-letter matrices (The Mergenthaler Linotype Company, 1906, 1908 reprint, p. 56). Matrices for the lower magazine had a large beveled notch cut in the bottom. Matrices with the notch cut can run in an upper magazine or in a single magazine machine by use of a special attachment. Matrices withouth the beveled notch can not run in a lower magazine. The Mergenthaler Linotype Company, 1906, 1908 reprint, p. 56 recommends to select commonly used faces for the upper magazine and head-letters or other faces which are of secondary importance for the lower magazine. | Model 7 is identical to model 4, but is constructed in such a way that lines up to 36 ems could be cast. | |||||||||||
| 81 | Linotype (US) | Model 8 (Old Style) | 8 (Old Style) | June 1911-… | Model 8 (New Style) | It could be purchased as a one-magazine machine and extended later on. Equipment included in the machine's price are three magazines, three fonts of matrices, three molds, water cooled disk, and sectional universal ejector (Spencer, n.d.). | ----- | No | 3 | Superimposed on a movable frame. All magazines on this machine were alike and interchangeable. All magazines were interchangeable with Models 4 (upper magazine), 5, 6, 7 (upper magazine), 11, 14, 18 and 19. The upper magazine was removed from the front, but more difficult than on the Model 5. To remove the middle magazine, the upper escapement block needs removal from the upper magazine and its frame raised. The lower magazine was difficult to remove. It was easier to run the matrices out and another set in. Changing magazines was done with a small wheel with a handle at the operator's right. Ten revolutions are needed to switch magazines. | 1 | Water cooled mold disc | Sectional universal ejector | Equipment included in the machine's price are three magazines, three fonts of matrices, three molds, water cooled disk, and sectional universal ejector (Spencer, n.d.). | ||||||||||||
| 82 | Linotype (US) | Model 8 (New Style) | 8 (New Style) | Model 8 (Old Style) | ----- | No | 3 | This model was also available as a 72-90 channel machine. | This machine carries three split magazines. For changing magazines, the magazine frame opens in a fan shape. | The New Style Model 8 is the same as the Old Style Model 8, only with updated magazines whith improved escapement mechanisms and a special automatic lever. | ||||||||||||||||
| 83 | Linotype (US) | Model 9 (Mixer) | 9 | May 1911-… | ----- | Yes | 4 | 4 | The magazines do not move tip and down, as on the Model 8. Magazines were removable from the front, after the faceplate was swung back to expose the keyrods and connecting rods. Magazines were interchangeable, but not with other Models. Changing the magazine happened by a lever at the operator's right. This shifted the connecting rods up and down. Magazine change requiring four or five minutes. | 4 | With 4 sets of screws | |||||||||||||||
| 84 | Linotype (US) | Model 10 | 10 | May 1911-1913 | Model 15 in 1913 | ----- | No | 1 | 1 | Limited to faces from 5 point to 11 point (*see note below the page). | Model 10 is a small single magazine machine, for offices that can't afford the high priced Model 5. The Mergenthaler Linotype Company put the price of the Model 10 comparatively low, so it would not interfere with the sale of higher priced models. Therefore, Model 10 has its limitations in speed and range. Its small magazines only hold fourteen matrices instead of the usual twenty. This reduces its speed because the operator could run out of sorts, ensuring that this model was not of any interest for larger shops. The range of matrices was also limited to faces up to 11 point only. | |||||||||||||||
| 85 | Linotype (US) | Model 11 | 11 | ----- | No | Model 11 is identical to model 8, but is constructed in such a way that lines up to 36 ems could be cast. De Jong (1947, Dutch literature) mentions 'a length of 34 augustijn'. | ||||||||||||||||||||
| 86 | Linotype (US) | Model 12 (Mixer) | 12 | ----- | Yes | 4 | Model 12 is identical to model 9, with four magazines, but is constructed in such a way that lines up to 36 ems could be cast. De Jong (1947, Dutch literature) mentions 'a length of 34 augustijn'. | |||||||||||||||||||
| 88 | Linotype (US) | Model K | K | February 1913-… | ----- | No | 2 | The upper magazine was removable from the front. The lower magazine was difficult to remove. | 1 | Limited to faces from 5 point to 11 point (*see note below the page). Due to the narrow magazines. | The default equipment of the Model K includes two fonts of matrices, two molds, (new), and a new set of spacebands (Spencer, n.d.). This machine was an answer on the competitor the Intertype. | A rebuild model 1 (or sometimes other models), only some machines were mostly new (Spencer, n.d.). | ||||||||||||||
| 89 | Linotype (US) | Model 14 (Old Style) | 14 (Old Style) | July 1914-… First exhibited in April 1914 at the Waldorf-Astoria Hotel, New York. | 14 (Later Style) | ----- | No | 3 | 3 main magazines, superimposed on a movable frame, one side magazine with 28 channels on the right side, which was 7 3/4 inches wide. Main magazines on this machine were alike and interchangeable. Main magazines were interchangeable with Models 4 (upper magazine), 5, 6, 7 (upper magazine), 11, 14, 18 and 19. The upper magazine was removed from the front, but more difficult than on the Model 5. To remove the middle magazine, the upper escapement block needs removal from the upper magazine and its frame raised. The lower magazine was difficult to remove. It was easier to run the matrices out and another set in. Changing magazines was done with a small wheel with a handle at the operator's right. Ten revolutions are needed to switch magazines. The auxiliary magazine was easy to change and there was a rack fit in the rear of the machine for extra magazines. The matrices contained in this auxiliary magazine were released by means of an escapement mechanism connected directly (that is, without a keyboard cam action) to a series of key buttons, somewhat like those, on an adding machine, but arranged vertically. | 1 | The distribution bar and screws were elongated for the extra magazine. | Water cooled mold disc | Sectional universal ejector. | The side magazine could carry ordinary Linotype matrices or large display characters up to 42 or 48 point set-wise. The large matrices have of lugs, and thus each character occupied two channels. (Spencer, n.d.) | Model 14 is identical to model 8, but is the first Model equipped with an additional side magazine. Equipment included in the machine's price are three magazines, three fonts of matrices, three molds, water cooled disk, and sectional universal ejector (Spencer, n.d.). The machine is designed to set headletter or large advertising figure display composition in connection with its regular work. Since the matrices from the auxiliary magazine must be carried to the assembling mechanism by means of an auxiliary matrix delivery belt, it was obviously impossible to assemble them at any considerable speed particularly large characters. Many operators prefer to assemble the matrices by hand from an automatic sorts stacker, and either lift them from the second elevator by hand or allow them to run down to the stacker. The auxiliary magazine could be changed very readily, and there was a rack fit the rear of the machine for carrying extra magazines, The auxiliary keyboard was a punch-board with two sets of key buttons, superimposed, so, that it change from one to the other could be made very easily. (Spencer, n.d.) | |||||||||||
| 90 | Linotype (US) | Model 14 (Later Style) | 14 (Later Style) | On 1 February 1930, a new style of side unit was introduced. It contained three side magazines with 34-channels (11 1/4 inches wide). All prior side magazines had 28 channels. Narrow and wide side magazines were not interchangeable. | 14 (Old Style) | 32 | The first single keyboard Model 14 carried serial number 33590. Model 14's carrying serial No. 33590 up to serial No. 46706 have narrow 34-channel side magazines. Model 14's carrying serial No. 46706 and above were equipped with the so-called wide 34-channel side magazines. | ----- | No | This machine was also offered as a 72-90 channel machine. | The Later Style model carries split magazines, which were easier to remove. The side magazine carries wide type, and a special lever cuts of the cap side of the main keyboard (on the right side), redirecting those keys to the side magazine. This mechanism was a complicated construction. | |||||||||||||||
| 91 | Linotype (US) | Model 14 L.L.A. (Long line attachment) | 14 L.L.A | ----- | No | This model is identical to model 14, but is constructed in such a way that longer lines could be cast. De Jong (1947, Dutch literature) mentions 'a length of 34 augustijn'. Spencer (n.d.) did not mention this model. De Jong mentioned this model, but not the later style model 14. It therefore is unclear if this model carries the wide 34 channel auxiliary magazine. | ||||||||||||||||||||
| 92 | Linotype (US) | Model 15 | 15 | October 1913 | Model 10 | ----- | No | 1 | Short magazine for only 14 matrices. | 1 | 5-14 points | It still has the short magazine, which is removable from the front and can cary only 14 matrices per channel. But this model allows faces from 5 point to 14 point. With a slight additional cost, the machine can be equipped for faces up to 36 point (Spencer, n.d.). | ||||||||||||||
| 93 | Linotype (US) | Model 16 (mixer) | 16 | April 1916 | ----- | Yes | 2 | 2 | The magazines do not move up and down in a frame as on Models 8 and K. To change from one magazine to the other the operator presses a key at the right of the keyboard and the Mergenthaler advertising states that the change was so quick that operation from both magazines was continuous. Standard length, but three inches wider than the ones heretofore made, necessary for the matrices of the lower magazine to pass between the keyboard rods. | 2 | As in the Model 9, a primary distributor separates matrices. They then drop through the distributor box of the magazine in which they belong. | Magazines were not interchangeable with the 9 or with, any other machine. | ||||||||||||||
| 94 | Linotype (US) | Model 17 (mixer) | 17 | April 1916 | ----- | No | 2 | 2 main magazines, one side magazine. Its regular magazines are changed with a key at the right of the keyboard. Standard length, but three inches wider than the ones heretofore made, necessary for the matrices of the lower magazine to pass between the keyboard rods. Auxiliary magazines are removed from the front. Auxiliary magazines are interchangeable with the Models 14 and 19. A rack in the rear of the machine for three extra magazines. Similar to the Model 14, the auxiliary magazine has twenty-eight channels for matrices of any size, including condensed caps, fonts of large display faces, accented characters, advertising figures, headletter, etc. | 2 | As in the Model 9, a primary distributor separates matrices. They then drop through the distributor box of the magazine in which they belong. | This machine was similar to Model 16, but carried the auxiliary magazine attachment. As on the Model 14, the auxiliary magazine keyboard is a punch-board with one set of keys placed over the other in such a way that two layouts for the auxiliary magazine could be on the machine at the same time. | |||||||||||||||
| 95 | Linotype (US) | Model 18 | 18 | April 1916 | ----- | No | 2 | Interchangeable with Models 4 (upper), 5, 6, 7 (upper), 8, 14 and 19. Removable from the front. | 1 | Water-cooled mold disk | Sectional universal ejector | Equipped with the universal knife block, and double deck sorts stacker. | Resembling the Model 5. Changing magazines happened as in the Model K. | |||||||||||||
| 96 | Linotype (US) | Model 19 | 19 | April 1916 | ----- | No | 2 | 2 main magazines, one side magazine. Interchangeable with Models 4 (upper), 5, 6, 7 (upper), 8, 14 and 19. Removable from the front. Matrices from the auxiliary magazine could be mixed in the same line with matrices from either one of the regular magazines, but all must be distributed before a change of the regular magazines was made. | 1 | Water-cooled mold disk | Sectional universal ejector | Equipped with the universal knife block, and double deck sorts stacker. | Model 19 is identical to model 18, but is equipped with a side magazine. | |||||||||||||
| 97 | Linotype (US) | Model 20 | 20 | April 1917-… | ----- | No | 1 | 72 | 72 channel magazine with a normal width but only half the length of a normal magazine. | 1 | Faces were however limited to a fat 24 point. | This machine is aimed at the advertising industry. Keyboard with 72 keys. | Patterned after the Model 5 | |||||||||||||
| 98 | Linotype (US) | Model 21 (Old Style) | 21 (Old Style) | April 1921-… | 21 (later Style) | ----- | No | 1 | Full length or split-length 72 channel magazine with a normal width, similar as the Model 20. Changeable entrance frames. Each magazine has a matrix galley attached to its face, to accommodate sorts characters. To accomodate larger faces, it was equipped with two channel entrance frames. When setting faces no larger than those carried on the Model 20, the machine was operated just as was the Model 20 and all 72 channels were used. To set faces from 24 point to 36 point, the two channel entrances frames were switched by a lever at the side of the keyboard. The second channel entrance frame allowed to use fifty-five of the magazine channels, blocking the seventeen others. The movement of the lever also automatically locks seventeen of the keys, which leaves fifty-five of them in the operative position. In setting these extended faces, fifty-five of the magazine channels were used. A matrix galley attached to the face of each magazine accommodates sorts characters. | 1 | up to 36 point | This machine is aimed at the advertising industry. Keyboard with 72 keys. | Model 21 is identical to model 20, but can contain extra large type sizes. | |||||||||||||
| 99 | Linotype (US) | Model 21 (later style) | 21 (later Style) | 21 (Old Style) | ----- | No | The Later Style Model 21 is identical to model 21, but carries 3 magazines of full or splith length. | |||||||||||||||||||
| 100 | Linotype (US) | Model 22 (Old Style) | 22 (Old Style) | November 1920-… | 22 (later Style | ----- | No | 1 | 1 main magazine, 1 auxiliary magazine. Auxiliary magazines are interchangeable with all other auxiliary magazines of twenty-eight channels. The side magazine is operated with a separate keyboard at the right of the main keyboard. The full length magazines of both models provide full channels of text matrices. | Model 22 is identical to model 21, but is equipped with a side magazine with 28 channels that carries the characters that run as sorts on the Model 21, or full sets of advertising figures, or complete leadletter fonts of twenty-eight characters. | ||||||||||||||||
| 101 | Linotype (US) | Model 22 (Later Style) | 22 (later Style | 22 (Old Style) | All machines with higher serial numbers than 46700 (approximate) were equipped with wide 34-channel side magazines. This type of side magazine was not interchangeable with the so-called narrow, 34-channel type. | ----- | No | 3 | Spencer mentions that the auxiliary magazines are operated in the same manner as the new style Model 14 but has a vague descritpion. According to De Jong (1947), the later models had the side magazines operated by the main keyboard. | The Later Style Model 22 is identical to Old Style Model 22, but carries 3 magazines of full or splith length. The side unit was operated in the same manner as the new style Model 14. | ||||||||||||||||
| 102 | Linotype (US) | Model 24 (Mixer) | 24 | 1920-… Placed on exhibition in New York in April 1920. | ----- | Yes | 4 | 4 main magazines, 4 auxiliary magazines. | 4 | Up to a wide 36 point face. | Conceived as a display composing machine. | A Linotype Model 9 with 4 main and 4 side magazines, mixing on all. Only 56 constructed (list in {Goble 1984}, p. 431, from data in a 1971 Mergenthaler Linotype salesman's manual). The only thing that Spencer (n.d.) had to say about this machine is that it was a very complicated construction. | ||||||||||||||
| 103 | Linotype (US) | Model 25 (Mixer) | 25 | April 1924-… | ----- | Yes | 2 | 90 or 72 | Advertised that Model 5 magazines fit in either upper or lower position, either split or full length. Magazine change was done with a shift lever. Also offered as a 72-90 channel machine. | 2 | Matrices first pass through a primary distributor. | 4 | Matrices needed a cut in the bottom of the matrix for correct distribution. | it was claimed that all Linotype matrices would run in this machine if an extra cut in the matrix was provided. In 1927, the upper (or primary) distribution box received an update. The previous one resembled the old Model 2. According to Spencer (n.d.), this change ensured that Models 25 and 26 are comparable with Model 4, except that the shift on Model 4 was much more simple. It is unclear what exactly he had in mind with this comment. | Model 25 resembles Model 16. | |||||||||||
| 104 | Linotype (US) | Model 26 (Mixer) | 26 | April 1924-… | All machines with higher serial numbers than 46700 (approximate) were equipped with wide 34-channel side magazines. This type of side magazine was not interchangeable with the so-called narrow, 34-channel type. | ----- | Yes | 2 | 90 or 72 | 2 main magazines, 2 auxiliary magazines. Advertised that Model 5 magazines fit in either upper or lower position, either split or full length. Magazine change was done with two shift levers, for the main as well as the auxiliary magazines. Also offered as a 72-90 channel machine. Auxiliary magazines are exchangeable with Models 14 and 22. Main magazines are exchangeable and can be either split or full length. There is no second keyboard, the side magazines worked in the same way as the Model 14. | 2 | Matrices first pass through a primary distributor. the method of securing matrices from the side magazines was accomplished in the same manner as in the Model 14. The same complications apparent in the side unit mechanism of the Model 14 and 22 are found in this machine. | 4 | The range of face claimed for this machine was similar to that of the Model 14. | Matrices needed a cut in the bottom of the matrix for correct distribution. | it was claimed that all Linotype matrices would run in this machine if an extra cut in the matrix was provided. | Model 26 is identical to model 25, but is equipped with two side magazines with 34 channels. | |||||||||
| 105 | Linotype (US) | Model 27 (Wide Range) | 27 | April 1935-… | ----- | No | 3 | 72 | This was a one, two or, three main-magazine machine. Extra-wide 72-channel light weight split magazines, similar to Model 11. These magazines were 5% inches wider than the old 72-channel magazines. It was claimed that this machine will carry normal 36 point and condensed faces up to 60 point. Magazines are interchangeable with Models 33, 34, 35 and 36. If split magazines, 12 matrices would fit. | 1 | 4 | normal 36 point and condensed faces up to 60 point. | Aimed at the advertising industry. The Linotype "Wide Range" models were introduced in 1935 with the Models 27 and 28. The were later developed into the Models 33, 34, 35, & 36. The name "Wide Range" machines was used through at least the 1940s, but became "Rangemaster" machines later. | |||||||||||||
| 106 | Linotype (US) | Model 28 (Wide Range) | 28 | 1935-… | ----- | No | 3 | 72 | 1, 2 or 3 main magazines and 3 wide side magazines. extra-wide 72-channel lightweight split magazines, similar to Model 11. These magazines were 5% inches wider than the old 72-channel magazines. Magazines are interchangeable with Models 33, 34, 35 and 36. If split magazines, 12 matrices would fit. It only has one keyboard, working on the side magazine was identical to the Model 14. | 1 | 4 | normal 36 point and condensed faces up to 60 point. | Aimed at the advertising industry. The Linotype "Wide Range" models were introduced in 1935 with the Models 27 and 28. The were later developed into the Models 33, 34, 35, & 36. The name "Wide Range" machines was used through at least the 1940s, but became "Rangemaster" machines later. | Model 28 is identical to model 27, but is equipped with one or three side magazines. The Intertype sales person Spencer (n.d.) compares this machine to the Intertype Models H-1s.m. or H-3s.m. | ||||||||||||
| 107 | Linotype (US) | Two-in-One-Linotype (Single Distribution) | Two-in-One (Single) | ----- | No | 3 | One or two of the main magazines could have 72 channels for larger type sizes. | 1 | The machine has two assembler entrances with the magazines and two different distribution bars: one for the 92 channel-magazine and one for the 72 channel-magazine. Both the distribution bar and the assembler entrance were put in place by a lever on the right side of the machine. Only De Jong (1947) mentions this machine, Spencer (n.d.) did not. It could have been that De Jong meant a specific model with this… | |||||||||||||||||
| 108 | Linotype (US) | Two-in-One-Linotype (Continuous Distribution) | Two-in-One (Continuous) | ----- | No | The Two-in-One-Linotype (Continuous Distribution) has two magazines and two distributors. One of the main magazines has 72 channels. The machine is equipped with two side magazines. Only De Jong (1947) mentions this machine, Spencer (n.d.) did not. It could have been that De Jong meant a specific model with this… | ||||||||||||||||||||
| 109 | Linotype (US) | All-purpose-Linotype | All-purpose-Linotype | ----- | No | 0 | 0 | 0 | 5 till 144 | Matrices are inserted by hand. | This All-Purpose-Linotype has little in common with the other Linotypes but was build as a competitor to the Ludlow. Matrices with a type size from 5 till 144 point are inserted by hand. This made the machine suitable for large headings, advertising and ornaments. | |||||||||||||||
| 110 | Linotype (US) | Model 29 (Mixer, Blue streak) | 29 | November 1936-… | ----- | Yes | 4 | Magazine equipments and mixing possibilities as follows: One 72 and one 90, mix from both magazines. Two 72, mix from both magazines. Two 90, mix from both magazines. One 90 and two 72, mix from first two only. Two 90, one 72, mix from first two only. Three 90, mix from first two and bottom two. Three 72, mix from first two and bottom two. Four 72, mix from first two, second two and bottom two. Four 90, mix from first two, second two and bottom two. Two 72 and two 90, mix from first two and bottom two. | 2 | From model 29 on, all moving parts are covered, which is named 'Blue Streak'. | Comparable to the Intertype F and G F4 and G4. | |||||||||||||||
| 111 | Linotype (US) | Model 30 (Mixer, Blue streak) | 30 | 1936-… | ----- | Yes | 4 | Following was a list of possible magazine equipment which Price Of full magazine for Models 27 and 28, $225.00, lower split, $190.00 each. Is similar to Intertype two and four-magazine F-4s.m. and G-4s.m.: One 72 and one 90, with two side magazines, mixing both magazines. One 72 and one 90, with four side magazines, mixing both magazines. Two 72, with two side magazines, mixing both magazines. Two 72, with four side magazines, mixing both magazines. Three 72, with three side magazines, mixing first two and bottom two. Four 72, with two side magazines, mixing first two, second two and third two. Two 72 and two 90, with two side magazines, mixing from first two and bottom two. Two 72 and two 90, with four side magazines, mixing from first two and bottom two. One 90 and two 72, with three side magazines, mixing from first two only. Two 90 and one 72, with three side magazines, mixing from first two only. Two 90, with two side magazines, mixing from first two. Two 90, with four side magazines. mixing from first two. Three 90, with three side magazines, mixing from first two and bottom two. Four 90, with two side magazines, mixing from first two, second two, third two. Four 90, with four side magazines, mixing from first two, second two, third two. | 2 | Model 30 is identical to model 29, but is equipped with two. three or four side magazines. | ||||||||||||||||
| 112 | Linotype (US) | Model 31 (Master Model, Blue streak) | 31 | ----- | No | 4 | 90 or 72 | This machine could be supplied in two styles. One style was the same as the Model 8 and could be supplied as a 1, 2, 3, or 4 main (split or full-length) magazine machine. The other style was known as the Two-in-One and carried 72 and 90-channel magazines starting from two main magazines in combinations as follows: Three 72 and one 90-channel magazine or vice versa, or two 72 and two 90-channel magazines or vice versa, or one 72 and one 90 or two 90 and one 72. Also, 72 or 90-channel magazines could be placed in any position. The change of magazines was accomplished by a dial for selecting the proper channel entrance. These machines were known as Blue Streak models. | 1 | 4 | ||||||||||||||||
| 113 | Linotype (US) | Model 32 (Master Model, Blue streak) | 32 | 14 | ----- | No | 4 | 90 or 72 | 1 | Model 32 is identical to model 31, but is equipped with 1, 2, 3, or 4 side magazines. Spencer (n.d.): Both models could be had as 42-em machines, also regular and low quadding, fixed indention, and 6-pocket mold disk at additional cost. Both models were supplied as 1, 2. 3, or 4 main or side magazine machines except in the 72-90 combination nation which starts with two main magazines. | ||||||||||||||||
| 114 | Linotype (US) | Model 33 (Blue streak) | 33 | ----- | No | 4 | 72 | The magazines only have 72 channels and are 35% wider than the default magazines. This makes them suitable for matrices up to a type size of 36 point. | 1 | 6 | The keyboard only has 72 keys, the mold disk has six molds, and the machine is equipped with an automatic cooling installation (named Thermo-Blo). | |||||||||||||||
| 115 | Linotype (US) | Model 33 (Two-in-One, Blue streak) | 33 (Two-in-One) | ----- | No | 4 | 90 or 72 | Model 33 has four extra large magazines with 90 or 72 channels. Even in the 90 channel-magazines, a type size up to 24 point would fit. Despite that the magazines could be limited to 72 channels, the keyboard had 90 keys. Equipped with 2 or 4 magazines carrying Special Extra Wide 72 and Extra Wide 90-channel main magazines. The 90-channel magazines carry 24 pt. normal faces and the 72-channel magazines carry 36 pt. faces. The 72-90 feature machine requires a special channel entrance change when shifting from 90 to 72-channel magazines and vice versa and in addition there were other changes, five or six, necessary before matrices could be assembled. | ||||||||||||||||||
| 116 | Linotype (US) | Model 34 (Blue streak) | 34 | ----- | No | 4 | 90 or 72 | Model 34 resembles model 33 (Two-in-One) with side magazines. Spencer mentions 1 side magazine, other sources 4. It also has an improved assemblage, ensuring that matrices from the side magazines are transported with a larger speed. This model is equipped with a separate keyboard for the side magazines. | ||||||||||||||||||
| 117 | Linotype (US) | Model 35 (Mixer, Blue streak) | 35 | ----- | Yes | 2 | 90 or 72 | The magazines are extra large. | 2 | This super display model was similar to the Model 33 except that it was a mixer machine. It carried the same extra wide 72 and extra wide 90-channel magazines as the Model 33 and it was our understanding that the Model 35 had the same type of channel entrance as was carried on the Model 33. This model carried two or four main magazines only. | ||||||||||||||||
| 118 | Linotype (US) | Model 36 (Mixer, Blue streak) | 36 | ----- | No | 2 | 2 | Model 36 is identical to model 35, but is equipped with four side magazines. This model is equipped with a separate keyboard for the side magazines. Spencer states: Same as Model 35 except the two main-magazine machine carried two auxiliary magazines and the four main-magazine machine carried four auxiliary magazines. > indicating that there has been a two-magazine model | ||||||||||||||||||
| 119 | Linotype (US) | Comet (Blue streak) | Comet | 1950-… | ----- | No | 1 | 1 | The Linotype Comet was a single-magazine machine for speed and TTS use. | |||||||||||||||||
| 120 | Linotype (US) | Electron (Blue streak) | Electron | ----- | No | The Electron is a machine generally for use with TTS. It introced several novelties over previous models, such as a huge amount of electronic parts and the elimination of the Assembling Elevator (which is the first fundamental engineering change in the Linotype machines since 1890). It was often poorly regarded by machinists due to the many disruptions while working. Intertype later released its competitor the the Intertype Monarch, which was considered better by operators. There are stories from Electrons, such as the one at Typorama, Switzerland, that are put out of service one week after purchase. | ||||||||||||||||||||
| 121 | Ludlow | Model L | L | ----- | Yes | |||||||||||||||||||||
| 122 | Ludlow | Model M | M | ----- | Yes | |||||||||||||||||||||
| 123 | Monotype | Composition Caster | ----- | NO | ||||||||||||||||||||||
| 124 | Monotype | Super Caster | ----- | No | ||||||||||||||||||||||
| 125 | Monotype | Keyboard | ----- | ? | ||||||||||||||||||||||
| 126 | Neotype | Model Н-2 | Н-2 | 1936-… | ----- | ? | ||||||||||||||||||||
| 127 | Neotype | Model Н-3 | Н-3 | 194?-… | ----- | ? | ||||||||||||||||||||
| 128 | Neotype | Model Н-4 | Н-4 | 1949-… | ----- | ? | ||||||||||||||||||||
| 129 | Neotype | Model Н-5 | Н-5 | 1950-… | ----- | ? | ||||||||||||||||||||
| 130 | Neotype | Model Н-6 | Н-6 | 1954-… | ----- | ? | also referred to as the “NMS” – НМС in Cyrillic alphabet. | |||||||||||||||||||
| 131 | Neotype | Model Н-4Ц | Н-4Ц | 1956-… | ----- | ? | ||||||||||||||||||||
| 132 | Neotype | Model Н-7 | Н-7 | 1958-… | ----- | ? | ||||||||||||||||||||
| 133 | Neotype | Model Н7-ф | Н7-ф | ----- | ? | While the name on this machine was similar to the one above, it is different in some details. It is unclear what the relation between both machines was, and where the ф is referring to. It probably refers to some updates in the model. | ||||||||||||||||||||
| 134 | Neotype | Model Н-10 | Н-10 | 1959-… | ----- | ? | This was the earliest model compatible with the Soviet version of the Teletypesetter, a device that went by the name 'NPU' (НПУ). | |||||||||||||||||||
| 135 | Neotype | Model Н-11 | Н-11 | 1959-… | Н-5 | ----- | ? | |||||||||||||||||||
| 136 | Neotype | Model Н-12 | Н-12 | 1170 mm wide, 1300 mm deep, 1700 mm high | 950 kg | ----- | ? | 2 | Small magazines with 15 matrices per channel. | 4 | 4 universal casting moulds. Only upon special request, recess moulds - point size from 10 to 12 points. Slug up to 28 Cicero. | from 6 to 12 points | Upon request, combined air-water cooling system and STAR-PARTS quadding and centering device. Performance: 7 slugs per minute | |||||||||||||
| 137 | Neotype | Model Н-14 | Н-14 | ----- | ? | |||||||||||||||||||||
| 138 | Neotype | Model 2Н-104 | 2Н-104 | ----- | ? | |||||||||||||||||||||
| 139 | Neotype | Model Н-121 | Н-121 | 1360mm wide, 1270mm deep, 2100mm high | 1400 kg | ----- | No | 1 | 1 | 4 | 4 universal casting moulds. Upon special request fitted out with 16 points and recess moulds - point size from 10 to 16 points. Slug up to 28 Cicero. | from 6 to 12 points | Combined air-water cooling system. STAR-PARTS quadding and centring device. Performance: 9 slugs per minute. | |||||||||||||
| 140 | Neotype | Model Н-122 | Н-122 | 1360mm wide, 1270mm deep, 2100mm high | 1200 kg | ----- | ? | 2 | 4 | 4 universal casting moulds. Upon special request fitted out with 16 points and recess moulds - point size from 10 to 16 points. Slug up to 28 Cicero. | Point size from 6 to 12 points. | Combined air-water cooling system. STAR-PARTS quadding and centring device. Performance: 9 slugs per minute. | ||||||||||||||
| 141 | Neotype | Model Н-124 | Н-124 | 1360mm wide, 1270mm deep, 2100mm high | 1400 kg | ----- | ? | 4 | Point size from 6 to 12 points. | 4 | 4 universal casting moulds. Upon special request fitted out with 16 points and recess moulds - point size from 10 to 16 points Slug up to 28 Cicero. | Combined air-water cooling system. STAR-PARTS quadding and centring device. Performance: 9 slugs per minute. | ||||||||||||||
| 142 | Neotype | Model Н-140 | Н-140 | 1900mm wide, 1750mm deep, 2200mm high | 1900 kg | ----- | ? | 4 | 4 universal casting moulds. Upon special request fitted out with 24 points and recess moulds - point size from 12 to 24 points. Slug up to 28 Cicero. | Point size from 6 to 20 points | prepared for TTS. Combined air-water cooling system. STAR-PARTS quadding and centring device. Performance: 11 slugs per minute, if fitted out with TTS: 15 slugs per minute. STAR-PARTS AutoSetter. | |||||||||||||||
| 143 | Neotype | Model Н-140 ф | Н-140 ф | ----- | ? | |||||||||||||||||||||
| 144 | Neotype | Model L-136 | L-136 | ----- | ? | 0 | Exchangeable casting moulds. | Leads: 1 to 16 points Slugs: 2 to 24 points Webs: 24 to 36 points Length: up to 150 Cicero | Slug and lead casting machine. Performance p/h: depending upon point. size up to 25 kg. Water cooling system. Adjustable web length. Automatic cutting device. Electronic temperature regulator. Minimum advance movement about 1 Cicero. Maximum advance movement 8 Cicero. | |||||||||||||||||
| 145 | Zetotype | Model 5C (double tray Mixer Model) | / | / | / | ----- | Yes | 2 | 2 | 90 | 2 | 4 | Only two prototypes of the dvouzásobníkový Míchač 'Zetotype'—the double tray Mixer Model 5c—were ever produced. It was almost an exact reproduction of the German Linotype Model 5c. Hence, both names cary the same code number. |
© 2021-2026 Maarten Renckens and other contributors. All rights reserved. All materials on this website are available for non-commercial re-use, provided the original author is credited and a proper reference to this site is included. Thank you!
All materials are considered copyrighted by the author(s) unless otherwise stated. Some materials from other sources are used. If you find any content on this page that you believe is not free of copyright, we appreciate a notification.
All collaborations and additional sources are more than welcome. Please contact info@maartenrenckens.com if you have materials you consider valuable.